Back to the journal

Journal · 11/11/2026 · 4 min read

24-karat gold on porcelain, fixed by fire

A band of 24-karat gold is laid on by hand, with a single stroke of the brush, and becomes permanent only in fire. Gold does not tarnish or lose its brilliance, which is why for centuries it has accompanied objects meant to last for generations.

A HolyVerre porcelain urn carries a band of 24-karat gold, laid on by hand and fixed by fire. It is one of the last stages of the work, carried out on finished, fired porcelain. The steadiness of the hand decides whether the gold line will be even, clean and unbroken.

What 24 karats means

The karat is a measure of the purity of gold, and the scale ends at 24. Twenty-four-karat gold is pure gold, without any other metals mixed in. Eighteen-karat gold contains 75% gold, and fourteen-karat a little over half.

Pure gold is rarely used in jewelry, because it is soft and scratches easily. On porcelain this softness does not matter, because the gold fuses with the surface and becomes part of it. It also keeps the warm, deep color that alloys of gold with other metals lack.

Gold that never loses its brilliance

Gold is one of the few metals that do not react with air or water. It does not tarnish, darken or corrode, even after many decades. That is why for thousands of years it has adorned objects meant to outlast the people who made them.

In the traditions of many cultures, gold stands for light, eternity and all that cannot be destroyed. On a memorial it becomes a sign that the memory of someone remains bright and lasting. The band surrounds the form with a brilliance worthy of an exceptional life.

Gilding porcelain has a long history

European manufactures gilded porcelain almost from the moment they learned to make it. In the eighteenth century, gold bands and ornaments adorned court services and ceremonial objects. Gilding was the art of a separate workshop, demanding other skills than forming and painting.

Over the centuries patterns and styles changed, but the technique itself stayed much the same. Gold is still laid on with a brush, by hand, and then fired in a separate kiln. A machine can print a gold pattern, but it cannot replace a line guided by hand.

How a gold band is made

Gilding porcelain follows several steps, carried out on the finished, glazed form.

  • preparing the surface - the porcelain is cleaned of dust and grease, so that the gold adheres evenly
  • laying on the gold - a gold preparation is applied with a brush, in one continuous line along the edge
  • drying - the layer of gold dries before the form goes into the kiln
  • decoration firing - the fire burns away the medium, leaving pure gold on the porcelain
  • inspection - the band is checked for evenness, continuity and brilliance

The hardest part is laying gold on the curve of the form. The crystal cutter works with a wheel, the porcelain gilder with a brush and a held breath. The line must keep the same width around the whole form, without thickening or breaks.

Fire makes the gold permanent

Gold laid on with a brush is not yet permanent and could be wiped off with a finger. Only the decoration firing bonds the metal to the surface of the porcelain for good. This firing runs at a lower temperature than the firing of the porcelain itself, so as not to disturb the glaze.

After firing, the gold cannot be removed by ordinary handling. The band becomes part of the piece, as lasting as the porcelain it surrounds. Laid on by hand. Fixed by fire.

Gold on matte and gloss porcelain

Every model in the Harmony Collection is made with a matte or a gloss surface. Gold looks different on each, though it is the same metal and the same technique.

  • matte porcelain - the gold line stands out sharply and clearly against the velvety surface
  • gloss porcelain - the gold merges with the shine of the glaze into one luminous whole

On matte black, gold looks like light in darkness. On pearl white, it becomes a warm, quiet accent.

Gold in the Crystal Collection

Gold also appears in the Crystal Collection, on the handle or the cross that crowns the lid. The Golden Light color gives the porcelain core a golden shade, visible through the cut crystal. More about that collection can be found in the post how a crystal urn is made.

Caring for a gold band

Gold on porcelain asks only for gentleness. It is cleaned with a soft, dry or slightly damp cloth, without abrasive agents. Strong detergents and impacts that could scratch the band should be avoided.

It is a memorial for someone whose life left behind a brilliance that does not fade.